• Blog
  • Forum
  • Protoneer Shop
    • Amazon Shop
    • Ebay Shop
  • Projects
    • GRBL Arduino Library
    • Arduino CNC Shield – 100% GRBL Compatible
    • Arduino MORE-CORE Shield – Multi-core Setup
  • Contact Us
Protoneer.co.nz Electronic Prototyping Specialists

Projects

2 Thoughts on “Projects”

  1. ChrisBall on 2015/01/28 at 9:15 pm said:

    Hi from Australia, my name is chris,
    I am building a large cnc for 2400 x 1200 sheets, using nema 34s.
    Really interested in Arduino and GRBL but have too much current draw I think.
    Do you have any suggestions? Thank you and good luck

    Reply↓
    • Bertus Kruger on 2015/01/29 at 5:18 am said:

      Hi. Think of GRBL as a signal generator. If you get proper stepper drivers like Gecko drivers they will work with GRBL. If GRBL does not work out you can always upgrade to MACH3 or other CNC controlers. (Cost involved with GRBL is only an Arduino Uno + some time.)

      Reply↓

Leave a Reply to Bertus Kruger Cancel reply

Top Posts & Pages

  • Arduino CNC Shield - 100% GRBL Compatable
    Arduino CNC Shield - 100% GRBL Compatable
  • Arduino CNC Shield V3.XX – Assembly Guide
    Arduino CNC Shield V3.XX – Assembly Guide
  • Install and Run Putty on your Raspberry Pi
    Install and Run Putty on your Raspberry Pi
  • Grbl (Arduino G-Code Processor) - Pin Layout
    Grbl (Arduino G-Code Processor) - Pin Layout
  • GRBL Arduino Library - Use the Arduino IDE to flash GRBL directly to your Arduino
    GRBL Arduino Library - Use the Arduino IDE to flash GRBL directly to your Arduino
  • GRBL’s PWM functionality – How to control a laser or variable speed spindle.
    GRBL’s PWM functionality – How to control a laser or variable speed spindle.
  • Quick GRBL setup guide for Windows (Arduino G-Code Interpreter)
    Quick GRBL setup guide for Windows (Arduino G-Code Interpreter)
  • Raspberry Pi CNC Board / Hat
    Raspberry Pi CNC Board / Hat
  • Raspberry Pi Zero Footprint And Dimensions
    Raspberry Pi Zero Footprint And Dimensions
  • Arduino Uno and Mega Dimensions
    Arduino Uno and Mega Dimensions

RSS feed RSS - Posts

Categories

Archives

Subscribe to Blog via Email

Enter your email address to subscribe to this blog and receive notifications of new posts by email.

Join 276 other subscribers

Tags

3d Printed 3d Printer 3d printing Arduino Arduino CNC Shield Arduino Shield ARM Automation BeagleBone CNC Delta Printer DIY Drone Feeds Foam grbl Hexapod Kicad Kickstarter Kossel Pro Laser cutter Lego Linux Milling Machine Openbeam Openhardware PCB Pick and place Pinout Pololu Power Supply Python Quadcopter Raspberry Pi Reprap Robot Robot Arm Robot of the week Robots Rostock Scara Shield Sketchup Stepper Driver WIFI
© Copyright 2022 - Protoneer.co.nz
Infinity Theme by DesignCoral / WordPress